Safe and Secure
Each transaction is encrypted by VeriSign for the highest level of online purchasing protection.
Privacy
Your information is never shared or solicited.
Timely Transactions
All orders are processed within 1 business day.
When you need more power and you want to use less space, this is the solar charging powerhouse for you. Superior technology, great looks, and a long warranty for noiseless, worry-free power. Let sunsei® get you ready in no-time flat.
Buil-in blocking diode protects against natural discharge and electronic drain
Weather resistant and beautifully designed
Marine grade - Guaranteed against rust in a marine environment
Save more than $3000 in battery replacement and fuel generator costs over the lifetime of the panel
Provides 65 Watts at a maximum current of 4 Amps
25 Amp charge controller included - Protects your batteries from overcharging
Solar Monitor shows your systems voltage and current digitally
We guarantee 80% of the rated output power for a period of twenty years - Two years on the controller and the monitor
Reduce your carbon footprint - Replaces 194 lbs of CO2 emissions per year
LED power indicator lets you know that the panel is working
Multiple panels can easily be connected together
Can charge all types of batteries
Can remain connected to the batteries at all times
PANEL MODEL#: SE 4000
Power:
6 Amps, 16.5 Volts (100 Watts)
Dimensions:
36.0 inches x 28.3 inches x 1.4 inches
116.5 cm x 72.0 cm x 3.6 cm
Weight:
28.6 lbs / 13 kg
20 Year power warranty
CHARGE CONTROLLER MODEL#: CC 25000
Maximum Current:
25 Amps (390 Watt max input)
Pulse width modulation
For 12 Volt and 24 Volt battery configuration
float charge at 13.7 Volts or 27.4 Volts
Boost charge at 14.5 Volts or 29 Volts
For indoor use
2 year warranty
SOLAR MONITOR MODEL#: SM 25000
Voltage range: 0 - 35 Volts
Current range: 0 - 25 Amps
Cable length:
19 ft and 8 inches / 6 m
Operating temperature:
-25 to 50 Celcius / -13 to 122 Fahrenheit
Case Protection: IP22
PACKAGE CONTENTS
1 x SE 4000 solar panel (item#25038)
1 x CC 25000 charge controller (item#11101)
1 x SM 25000 solar monitor (item#25203)
1 x Power cable, AWG 12 (10 Ft.)
4 x Standard stainless steel "S" mount brackets
4 x Steel self-tapping screws with nut, bolt and washer accessories
Instruction manual
INSTALLATION PROCEDURE
STEP 1: POSITIONING Select a location where your solar panels will get maximum daily sunshine exposure avoiding any shade. This may be on the roof or exterior walls of homes, cabins, RVs, etc.
Ideally, try to angle the panel in such a way that it will be perpendicular to the strong midday sun, between 10 a.m. and 2 p.m. However, this will change with the seasons. In the spring and fall a tilt between 40 and 45 degrees from the ground will suffice for most North American residents. A little less in the summer (about 20 - 30 degrees) and a little more in the winter (about 60 - 70 degrees from the ground).
STEP 2: MOUNTING Choose a solid and supportive mounting surface, capable of withstanding all expected loads, including the weight of the solar panel as well as those imposed by wind and snow. Attach “S” mount brackets to solar panel frame using screws and bolts provided. Use at least one bracket on every side of the panel. Position brackets on frame by sliding along track. Tighten screws to secure brackets to frame. Connect power cable to solar panel connector Using screws provided, secure solar panel to surface selected in step 1.
STEP 3: MULTI-PANEL CONNECTION If you have more than one SolarCharger 4000/6000/8000 panel, simply connect the Plug’n’Play® corner of one panel to the next using the quick-connect cable (ITEM#10222, and it is also included in the expansion kit, ITEM#71101, both are available for purchase on our website). Observe steps 1 and 2 when mounting additional panels.
STEP 4: CHARGE CONTROLLER TO BATTERY CONNECTION Place the charge controller in a cool, dry and well ventilated area that can be easily accessible, usually around the battery compartment or in the cabin area. Connect the charge controller’s output or battery negative (black or -) connection to the negative (-) terminal of the battery. Next, connect the controller ’s output or battery positive connection (red or +) to the positive (+) terminal of the battery.
STEP 5: CHARGE CONTROLLER TO THE PANEL CONNECTION First, connect the power cable to the charge controller’s input or “Solar Panel / Array” connection. Start by connecting the black negative (-) wire of the power cable to the charge controller’s negative (-) connection. Then, connect the red positive (+) wire of the power cable to the positive (+) connection of the controller. Second, plug in the quick-connect side of the cable to your solar panel’s quick connect port.
NOTE: For more details on the charge controller operation, consult the controller instructions included with your sunsei™ charge controller (available at www.sunsei.com/Manuals).
NOTE: Remove yellow wire protector caps prior to connecting to a sunsei™ charge controller NOTE: The installation procedure above is an extract from the complete manual (included in the box). Before installing your solar charger please consult this full paper version at www.sunsei.com/Manuals.
SHIPPING TERMS
The shipping cost for this item for US and Canada is; FREE
Your order is shipped out usually within 24 hours, for in-stock items
Ground shipping arrives at your door within 5 business days
